RF FEEDER CABLE 1/2» SUPER FLEX
Descripción
| Mechanical Characteristics | ||
| Inner Conductor | Copper clad aluminium wire | 3.55 mm |
| Dia over Dielectric | Foamed PE | 9.0 mm |
| Dia over outer conductor | Corrugated copper tube | 12.0 mm |
| Diameter over outer jacket | PE | 13.5 mm |
| Cable weight | PE | 170 Kg/Km |
| Tensile strength | 1000 N | |
| Bending moment | 3 Nm | |
| Flat plate crush strength | 15 N/mm | |
| Min.bending radius single | 15 mm | |
| Min.bending radius repeated | 30 mm | |
| No.of bends, minimum(typical) | 20(50) | |
| Recommended hanger spacing | 0.8 m | |
| Installation temperature | -40°C~+60°C | |
| Operating temperature | -55°C~+85°C | |
| Storage temperature | -70°C~+85°C | |
| Electrical Characteristics | ||
| Impedance | 50±1 Ω | |
| Relative Velocity of propagation | 81% | |
| Capacitance (1KHz) | 80 pF/m | |
| Maximum operating frequency | 10.2 GHz | |
| Cut-of frequency | 13 GHz | |
| Peak power | 19 KW | |
| Inner conductor DC-Resistance |
≤2.8 Ω/Km | |
| Outer conductor DC-Resistance |
≤3.8 Ω/Km | |
| Inductance | 0.200 µH/m | |
| DC breakdown voltage | 2500 V | |
| Jacket spark voltage (rms) | 5000 V | |
| Return loss (800~1000) MHz | ≥26 dB | VSWR ≤ 1.1 |
| Return loss (1700~2200) MHz | ≥24 dB | VSWR ≤ 1.13 |
| Insulation resistance | ≥10 GΩKm | |
| Passive intermodulation | ≥160 dBc | |
